Your Majesty, the Spectacle Has Missed the Country!

Chapter 259 Robot Arm and Magic Drawing Pen

Take the initiative! ?

Bruno's words undoubtedly made the hearts of everyone present tremble.

Because before this, passive defense was the strategy that Idar had always adhered to.

Although Navy Commander Mal Cullen has clamored countless times for the idle navy soldiers to take the initiative and blast the Odin people's assholes as soon as possible, Bruno has put them on hold.

But……

Seeing the huge power displayed by the Persuader I submachine gun, everyone present had an idea in their minds that they may have never considered before: take the initiative!

yes!

Since the Persuader I submachine gun is so powerful and low-cost, and will be installed on all Idar soldiers in the near future, why not the Idar leader equipped with this equipment? Can you take the initiative and drive those vicious Odin cavalry back to the north?

For a moment, everyone's hearts felt hot.

"The Army of Idar will obey the orders of the Earl, no matter how hard it is! As long as the magic rifle can be installed as soon as possible, the Army of Idar will definitely blow the heads of the Odin people!" Sam Layton said in a deep voice.

"The Navy wants it too!" Mal Cullen added from the side.

…

The New Year has passed and spring is approaching.

As the day of spring plowing gets closer, the atmosphere in Idar Territory gradually becomes tense.

but……

This kind of nervousness is not the panic of a wasted student facing the final exam, but rather like a top student who has been on the battlefield for a long time, thinking about how to amaze others while being nervous.

Idarin is not a Lay's potato chip that looks very puffy but has a strong taste but is a compressed biscuit that looks insignificant but is full of useful information.

Especially when the street lights along Idar Avenue emit a soft yellowish halo under the influence of magic, the Idar people's confidence in guarding their homeland has been completely ignited!

Since the Persuader I submachine gun demonstrated its power, taking the initiative has become a consensus reached by the leaders of Idar.

after all……

It would be too wasteful to use this kind of long-range weapon, which looks very impressive at first glance, to defend the city.

Glen Highlands.

On one side of the Idar Steel Factory, the Idar Arms Factory, which was built under Bruno's personal order, has been fully put into production and operation.

Ford Sr. rearranged the division of labor and work and rest schedules of workers, allowing workers in the factory to work in three shifts within a 24-hour period, allowing the production of the Persuader I submachine gun to continue at any time.

However, as the term magic industrialization is gradually realized in the Idar Territory, the production of some precision parts may still be unsatisfactory, but... magic machinery driven by magic has taken on most of the processes in the factory. .

The core craftsmanship of the magic rifle is that a large number of magic structures are gathered at the rear of the gun, and almost all of the production processes in this part are completed by magic machinery.

Using the knowledge they learned over the past few days, the mage apprentices designed a mechanical arm that could repeat the same actions and lines over and over again.

In practical applications, this mechanical arm powered by magic plays the role of a "mage's apprentice".

The magic power transmitted to the mechanical arm through the wire is divided into two parts, and most of the magic power is "put" into the power structure at the bottom of the arm to maintain the normal operation of the mechanical arm.

The other part of the magic power is obtained through the magic crystal slabs and various magic circles painted on the mechanical arm. After going through the steps of "classification" and "purification", the selected magic power is gathered on the surface of the mechanical arm. The most cutting-edge wand-like structure.

What do mages use to cast spells?

The answer is a staff.

The original intention of the staff's design is to allow the caster to cast magic faster by selecting suitable magic-friendly materials and catering to the mage's feel.

However……

When the Idar School gradually regarded the drawing of magic circles as the main research object, the original staff gradually became a useless weapon.

Because for the Idar School, it is really difficult to use a staff that is often forty to fifty centimeters long to draw a precise magic circle that is only a few centimeters in size.

Therefore, as early as the beginning of the research on the magic circle, Bruno improved the staff and designed a drawing tool that was more in line with the development ideas of the Idar School.

The length of the shortened staff will not exceed eighteen centimeters. Through the inlay of magic crystals and the arrangement of source stones, a "magic drawing pen" is formed that is no less effective than a regular staff.

The shape and structure of the magic drawing pen is similar to the pencil of the previous life. The pen barrel is made of the same magic-friendly wood as the staff, but the tip below the magic drawing pen is made of polished magic crystal. It is even more Convenient to draw the magic circle.

The robotic arm manufactured by Idar Ling also retains such characteristics.

At the same time, in order to ensure the service life of the robotic arm as much as possible and obtain maximum benefits, the cutting-edge structure of the robotic arm can be replaced at any time, greatly extending the service life of the robotic arm.

However... in the process of using mechanical labor to replace human production, there will definitely be many obstacles, and this kind of mechanical arm driven by magic to draw magic circles is not all advantages.

Since this is just the beginning after all, in order to ensure the stability and accuracy of the mechanical arm when drawing magic circles and splicing magic crystal slabs, the mages of the Idar School had to sacrifice the drawing speed of the mechanical arm so that it can At an extremely slow speed, the core structure of the magic rifle is mechanized according to the originally preset lines.

The speed of this kind of mechanical arm in drawing a magic circle is even slower than that of the most unfamiliar mage apprentice, but the problem is... as long as it has a sufficient supply of magic power, this kind of magic machine can tirelessly draw a magic circle. Another core component.

This is beyond human reach!

Especially in the Idar Territory, where the number of mages is extremely limited, even with the wonder bonus brought by the large lighthouse, the current number of mages and mage apprentices in the Idar Territory is only forty or fifty. UU Reading www.uｕkanshu.net .

Although this number is already large, if these mages are to be used as labor force, it is far from enough.

Although the production speed of a large number of robotic arms is slow, they can achieve large-scale production of core components by virtue of their quantitative advantage.

As for the workers in Idarland, what they need to do is to assemble the scattered parts and splice them into a complete Persuader I submachine gun!

Such a production process not only greatly improves efficiency, but also ensures to a large extent that the manufacturing method of the core structure is not leaked.

And when the Persuader I-type submachine guns were produced and gradually completed their installation, the managers of Idar Territory were not idle either. The combat ideas, attack methods, and expected targets... these were all Bruno's and issues that need to be considered by officials and generals at all levels under his command.

and……

Although taking the initiative may sound like just a change in combat thinking, in fact, it will involve all aspects of the Idar Territory, such as...

Before the war began, Bruno planned to tinker with the newspaper.