Nine Cents Refining

White-collar disciples, learning to use, hundreds of battles, competing with each other, to see who refining the art progress faster.

In particular, the top 100 disciples who have entered the first-level refiner are comparing each other and secretly competing. The progress of their respective refiners is also well known.

Everyone wants to reach the promotion conditions first, and everyone wants to stand out.

Among them, there are three white-collar disciples refining instruments into the country quickly, respectively, reached the level of senior level refiners, respectively, the sword of the European leaves, Xi Jiguang of the knife, Ma Huan of the hammer.

The three men led three hundred white-collar disciples, and gradually gathered some white-collar fans around them. They were supported by some disciples and were in the lead.

In particular, Ou Ye is deeply valued by Wang Hui and is the leader of this group of refining disciples.

At this time, Sun Hao has been forgotten.

It took three months to learn how to make a white-collar disciple. It is difficult to make people pay attention to the progress of their refining.

Sun Hao was in good order and entered the second step, adjusting.

Adjustment, also known as "alignment", this step, to put it bluntly, is to adjust the various proportions of the sword material.

For example, the sword is made, and the main materials are raw materials such as black iron and bronze.

This is the key to determining the performance of the sword.

Only by arranging the ingredients in a reasonable proportion can the sword be firm and tough.

The ancient "Kaogong Ji? The work of attacking gold" 曰: "Jin has six Qi", which indicates the proportion of the composition of the six kinds of refining materials of the sword, among which the proportion of the refining material of the Feijian Feijian is: Tiejuyi, copper accounted for three points (75%), and Xuanthai accounted for one point (25%).

This step is also very simple for other monks.

What is difficult? Isn't it proportional to the ratio?

This step. Many disciples are directly skipping. The monk is very sensitive to weight, and a little adjustment, it is really difficult to have a monk with a god.

But Sun Hao is here. Good guy, this step took another month.

Wang Hui is completely speechless.

This is an innocent refining apprentice.

It is really rare for a monk who is so slow in weight induction. A good proportion is placed there, and the left and right adjustments are not adjusted.

Have never seen this.

Wang Hui expressed his conviction.

It means that every day I see the strange apprentice who took the iron ingots. so much pressure. If there are more than one such apprentice, he will collapse sooner or later.

Sun Hao is different from most white-collar disciples in Wanshen Mountain.

The peculiar environment of the Soul Island has created a peculiar cultivation system here. Here, the refining and refining spirits prosper. However, refining and refining God are relatively backward.

This knowledge of the gods is not valued by the monks here.

Among the white-collar disciples, the level of knowledge is generally not high.

What is the standard of Sun Hao’s knowledge?

Sun Hao’s knowledge of the sea has reached the standard of knowledge of Jin Dan’s monks.

It is this level of knowledge that makes Sun Hao's adjustment slow down.

"The big edge of the sword", that is, the law of the sword is called the seventy-five percent of the copper, and the black iron is twenty-five.

However, Sun Hao modulation time. I found that I can't reach this standard.

The reason is very simple, Sun Hao found. "Jiu Qi Ji" "Six Qi" only identifies the two main components of the sword, copper and black iron, but in reality, whether it is bronze or black iron, it is impossible. pure. Among them, there must be other metal impurities.

Such as the middle of copper. There are tin, lead and some other metals. Then the question is coming. What is the most reasonable standard for the adjustment?

Other white-collar disciples, even if they can find such problems, there is no way to solve them.

Sun Haohua’s knowledge of the sea is really possible to solve this problem.

Sun Hao took out his own sword and carefully analyzed the proportion of his adjustment through the knowledge of God.

In reality, compare the swords and modulate all kinds of refining materials.

By contrast, Sun Hao found that among the swords, especially the best swords, the proportion of bronze is almost 75%.

The proportion of black iron is almost 20%, and the proportion of other metals is about half.

Not only that, but the proportion of other metals, within this half, also has a proportional requirement.

not easy.

After discovering this law, Sun Hao felt that it was not easy to complete the modulation.

This modulation should fully understand the proportion of various types of refining materials, and according to the size and weight of the sword, and reasonable matching of various refining materials, in order to ensure that this modulation reaches a scientific proportion.

Sun Hao does not understand, such a crucial step, why are other apprentices so easy to achieve?

Summer insects can't speak ice.

Different requirements, different realms, different ways, different behaviors.

that is it.

However, in the eyes of white-collar disciples, in the eyes of Wang Hui, the instructor of the sword room where Sun Hao is located, Sun Hao, who takes the iron ingots every day, is so strange and extra different.

This guy, who made a adjustment, actually worked for a month.

One month later, among the three hundred white-collar disciples, more than one hundred disciples successfully advanced to become first-class refiners, and others who did not advance, also reached the edge of promotion.

Only a handful of disciples have a poor foundation and continue to work hard.

However, in the second step of the refining, in addition to Sun Hao, there is absolutely nothing.

Through a month of unremitting analysis and hard work, through a month of uninterrupted efforts to adjust.

Sun Hao is finally making a difference.

Sun Hao is at hand, according to his own ideas, adjusts out ten pieces of refining swords with reasonable rationality.

After the tenth material was prepared, Sun Hao took a breath and carefully packed the ten materials and rested for a long time, ready to start the next step.

Unconsciously, Sun Hao has already passed this five years.

In five months, I only started in the second step of the refiner.

This makes Sun Hao feel the profoundness of comprehension and art again.

It is not easy to master any skill in comprehension.

After the adjustment, enter the third step of the refiner.

Melting.

After the refining of the material is stopped, it is smelted in a furnace. The purpose of smelting is to melt bronze, black iron, tin, lead and other materials into a liquid, while further removing impurities contained in the raw materials, such as charcoal attached to the raw materials, and other unneeded metals, so that the refining materials are more Pure.

The key to smelting is the word heat.

This step is similar to the technique of alchemy.

The smelting of the fire is grasped, and the refiner is more eager to look at the air.

The smelting fire has three stages. The first stage: where the shape of gold is cast, gold and tin, black turbidity, yellow and white; the second stage: yellow and white exhaust, green and white; third stage: blue and white Exhausted, Qingqi second.

In the third stage, the flame flame is pure, and the pure material is pure, which is when the fire is pure, and then it can be cast.

The role of this step is mainly to remove impurities, smelt impurities, and dissolve the refining materials into one.

It is also a crucial step in the refining machine.

The order of input of the refining materials and the holding of the smelting are very important.

This step is the process of repeated practice of repeated practice by white-collar disciples of Wanshen Mountain.

A white-collar disciple with a good foundation and quick learning. This step can be familiarized with about one month. The average disciple is about two months.

This step, for the disciples, the difficulty is not small, many swords, not only need a smelting, because there are more impurities, it needs to be repeatedly smelted.

"Kao Gong Ji? Li Shi" recorded "changing the golden tin", meaning that many swords need to be repeated many times, repeated smelting.

This step, it is difficult to live a lot of disciples.

When Sun Hao came to this step, he found that because he had the basis of alchemy's grasp of the fire ~www.wuxiaspot.com~ also because of his own modulation, it is already useful in matching the materials, it seems that this step is not imagined. It’s so hard.

Three or five days.

Sun Hao has been "completely fired".

However, at this time, no one has paid attention to Sun Hao. Even Wang Hui thought that Sun Hao was still adjusting.

Silently, Sun Hao easily completed the smelting.

Entered the fourth step of the refiner.

casting.

Casting, smelting and mature liquids are poured into the sword, and after the cooling and solidification, the sword is initially formed.

This step is not difficult for the monk, the force is even, and the distribution is even.

Like other monks, practice two or three days and get it.

In front of Sun Hao, the first rough embryo sword of his life appeared. (To be continued)