Monster Factory

You can search for “Super Monster Factory” in Baidu to find the latest chapter!

Shi Yuqing returned to the operating room and asked Dr. Shi to wait another 20 minutes.

“It’s really nonsense, you said it yourself. The cutting machine has to work for at least 5-Jun hours to cut it.” Another doctor stomped his feet angrily: “Who is responsible for the medical delay if a delay occurs?”

“I believe in him. He is a kind person.” Shi Yuqing directly ignored the doctor’s anger.

Dr. Shi, the chief knife, once again observed it with an endoscope. The palm of Ansi missed: “The palm of the little girl is all bluish, and I can only give it half an hour.”

“Zhong Captain, how many times have we done the demolition and cutting, can we cut it, do we still not understand?” The other 2 firefighters were hesitant, they were not afraid of taking responsibility, merely watching the little girl lying on the operation On the stage, it is too much to suffer, and the longer it is dragged on, the easier it is to have an accident.

“He said 20 minutes, we wait 20 minutes, we should give the little girl a hope.” Shi Yuqing believes Ye Qing, because his car was full of Cutting Machine Tool advertisements in the cutting field, certainly better than their firefighters Be more professional.

When the electronic clock on the wall passed ten to 70% of the time, pēng pēng knocking on the door sounded outside the operating room door.

The little nurse pushed the door to see that the youngster had gone and returned, and also pushed a device that looked very advanced, like the anesthesia machine commonly used in the operating room.

The nurse can recognize this machine without understanding the machine, not the so-called cutting machine.

It was too late to implement strict disinfection again, and the little nurse directly stuffed Ye Qing with a surgical gown and mask.

In the middle of Captain Shi Yuqing and 2 firefighters, the expression of joy was suddenly frozen in consternation. They quickly wiped their eyes and looked towards this machine ignorantly.

This is a small, but highly complex machine. 4 There are wheels on the bottom of the square, above which are the components of 8 hydraulic columns, a working platform on the top, and many black pipes that look very strong.

“Don’t you say you want to cut with a cutting machine?” Even Shi Yuqing, who knows a lot of cutting methods, has a big chin, and she is ignorant of Ye Qing.

“Who said I would use a cutting machine?” Ye Qing quickly pushed the machine to the operating table, and asked the nurse to quickly get 2 buckets of water.

“Y-yo-you ~ You don’t need a cutting machine, how do you cut it?” Another doctor’s angry nose was crooked: “What are you doing, why do you have to hit 2 buckets of water?”

Ye Qing ignored him and glanced at An Miss.

At this time, An Si-nian had closed her eyes and her expression was painful. Time has passed so long, she has no strength to open an eye opener.

The nurse was busy getting water, and Ye Qing each minding their own business pulled out the wires of this machine.

“I will give you science, this mechanical device is called a CNC ultra-high pressure water cutting machine.” Ye Qing plugged in the power supply and started the control panel: “Seeing that there are no multi-stage hydraulic columns below, it can pressurize the water to 380megapascal, ejected through the nozzle above the workbench, the water flow rate is three times that of the pistol bullet.”

“The cutting machine can produce immense heat even if it can cut stainless steel quickly. Water spray cooling can only reduce the surface temperature, and it needs to be cut for a while and stopped for a while, which is a waste of time.”

“The high-pressure water cutting machine can work completely without heating.”

High pressure water cutting machine ……

Everyone was thoroughly dumbfounded, and several firefighters also saw a high-pressure water cutting machine in Huaxing Heavy Industry when they engaged in Factory fire knowledge training. But the kind of device that can cut hard metal looks very awkward and very very expensive.

What about this one?

It’s so small that one person can move at will, and it’s no problem to put it in the back seat of the car.

But the ultra-high pressure water cutting machine, the water jet will definitely penetrate the stainless steel cylinder…

What would be the result of a water flow that even stainless steel could penetrate?

The nurse quickly hit 2 buckets of water, and Ye Qing couldn’t explain their doubts. After using the cursor to measure the thickness of the stainless steel cylinder, he quickly set the data on the control panel.

Yes!

If it is a traditional ultra-high-pressure CNC cutting machine, if you want to cut the stainless steel, leave only a shallow one layer without hurting the inside, almost impossible.

But Ye Qing, this small-scale CNC water cutting machine is different. This is the rare quality processing tools sold in the Tool Mall of Monster Factory.

It can automatically adjust the working pressure according to the cutting depth from the sensor. Do the same as the engraving machine, and cut out the desired thickness without any difference.

The height of the operating table can be adjusted. Ye Qing allows the nurse to adjust to the same height as the working table of the water cutting machine, and then isolates the working table with a surgical cloth to prevent the water flow from splashing on An Nian’s body.

After adjusting the parameters, Ye Qing gently put Ann’s left hand, along with the stainless steel cylinder, on the workbench.

There was a slight rotation sound of the motor, and two fixing plates protruded from the side of the table 2 to firmly fix the stainless steel cylinder.

As Ye Qing presses the switch on the control panel, the ultra-high pressure water jet nozzle on the 3-axis table slowly moves to the end of the center line of the stainless steel cylinder.

There is no such thing as a test knife. With the multi-stage hydraulic column under the table, it moves a little. The nozzle of the table “buzzes” and emits a very fine water jet that exceeds the formable power of human imagination.

Firefighters’ eyes widened, and in front of such high technology, they had completely lost their right to speak.

Doctors and nurses are also completely stupid. Even if they have to do surgery for 3 more years, they can’t imagine that industrial high-tech processing tools can be used to save people on the operating table.

The noise of immense made several little nurses unable to help covering their ears.

The scene in front of them made them unforgettable all their lives. The high-hardness stainless steel that even firefighters dared not try was actually harder than butter under the high-speed water jet.

The water jet travels through a precise line, and the fine water droplets 4 splash, leaving a deep cut groove.

The firemen’s hearts all mentioned their throats, and their eyes were fixed on the ultra-high pressure water stream, and they kept praying, whatever happens must not shoot through the entire stainless steel wall.

Ye Qing doesn’t worry at all, because this rare quality water cutting machine can automatically adjust the working pressure according to the cutting depth from the sensor.

Doubting its capabilities is tantamount to doubting the strength of Monster Factory.

The seemingly unprecedented water flow, in fact, the pressure amplitude has not been adjusted by the CNC programming how many times during the work.

After 3 minutes, the Number One Blade was completed by the CNC water cutting machine. Several firefighters bravely stepped forward, and carefully observed the cutting depth with big eyes staring at small eyes.

Si si ……

3 Pour air into the air, cut straight under the dent, and only one layer of thick stainless steel wall is connected to the 2 sides. This thickness is estimated to be torn apart by the person with great effort.

The Armed Police and Special Police Forces have a very performable special skill, called tearing the washbasin.

The thickness of the stainless steel washbasin is much thicker than this.

Ye Qing adjusted the machine and prepared to cut the second knife.

This time without Ye Qing speaking out, everyone obediently retreated to the side, watching Ye Qing one by one with an admiring and admiring look.

Several little nurses are almost crazy, they think this young and gold-haired man, when working, has a kind of attractive appeal.

A fierce “Boom~Boom~” waterjet cutting sound broke their speculation.

After 3 minutes, the 2nd cutting dent was cut out, and after Ye Qing pushed the cutting machine out, the firefighter who had been eager to have a try rushed over immediately.

2 Clamping the pliers to the stainless steel cylinder, they didn’t feel too hard, and the stainless steel cylinder was pulled away with a chuckle.

Perhaps the oppression of immense suddenly disappeared, and the left hand full of blue and purple was still unconsciously moved.

There was a wound in her palm. It was estimated that the wound was not deep, and the bleeding had stopped.

Both the back of the hand and the fingers were bruised. The layman knew that it was not serious.

Taking off the winch that was pressed on her hand, Dr. Shi carefully squeezed her palm and finger bone head, full of surprises: “It’s great, the bone is not broken. Take a CT immediately to see if there is any Cracked bone.”

“Pā pā pā ~” A little nurse clapped excitedly, watching Ye Qing as if watching Hero.

“Pā pā pā ～pā pā pā ～” Under the joy, the rest of the doctors and firefighters clapped their hands in excitement, throwing admiring eyes at Ye Qing.

“I apologize for my stupid behavior.” The doctor who was always worried about causing a medical accident and affected his future stepped forward, a little ashamed. “Today you gave me a class, what is technology!”

“I have to apologize too.” A firefighter stepped forward: “I still said in your heart that you were stupid X before, and pushed the ghost thing in.”

“Convinced, the prostrate oneself in admiration of the service, I never knew that the cutting operation could be advanced like this.”