Heavy Armoured Truck In Post-apocalyptic World

Chapter 257: The 1st Totem Engine

\u003c\u003e

The huge movement of the dual-core totem mutual switching device made Shen Cong unavoidably terrified, fearing that it would explode if it was not properly operated at such a high speed.

And the raging waves of activity in the outside world are also many times stronger than the field-strength storm.

Even if the dual-core totem mutual switching device is not used as an engine research, the storm caused by this is bigger than the golden dragon totem, which is enough to be included in the history of his personal research and invention.

Three minutes later, Shen Cong separated the two totems, and the scene gradually subsided.

After checking each other, they found that the Bull Demon King's totem had not changed much, but the surface of the Wild Boar King's totem had produced slight cracks.

"In the case of high-speed operation, the resonance field is distorted, and the active core of the wild boar king's fangs cannot withstand this distortion." Shen Cong quickly guessed the reason, the low-quality active core was still a bit weak.

It also shows that this dual-core totem mutual switching device has a very large loss on the active core, which is much larger than the loss of the dual-core active resonance field.

This kind of loss is understandable, after all, a more powerful storm of activity has been set off.

It is impossible for two low-level totems to burst out more powerfully than high-level totems without any consumption.

Despite the loss, Shen Cong was still pleasantly surprised.

Facts have proved that although cutting the resonance field cannot generate current, the resonance fields can twist each other and generate a huge repulsion force. Depending on this repulsion force, another device that generates kinetic energy can be made.

As long as kinetic energy can be generated, it means that whether it is power generation or an engine, there are prerequisites for realizing it.

And the most important thing is that this kind of device is based on the use of activity, and the consumption itself is not large.

There is a kind of folk science style of perpetual motion.

Of course, it’s not completely consumption-free work. Ordinary totems will generate two kinds of power consumption—one is the active guiding injection to maintain the stability of the resonance field; the other is the consumption of the active core itself, which will accelerate the use of the active core. life.

Bringing in a device with dual-core totem mutual switching, the same two types of consumption, and in order to maintain the stability of the respective fields of the two totems, the activity consumption is greatly increased, and the life of the active core is further reduced.

Just like these two fangs of the wild boar king, it can be used for at least three months to make a totem, but it takes only a few minutes to make a dual-core mutual cut, and cracks have already formed, which is on the verge of destruction.

"So, to take advantage of intercutting devices, you need a lot of high-quality active cores."

"I can afford this consumption."

Shen Cong of the first generation, now his hair, nails, and teeth are about to grow out, and he hasn't had time to check his condition, but at least he is several times stronger than before he entered the lv1 era.

Once the strength is strong, it is not too difficult to hunt and kill powerful golden beasts. High-quality active cores can be continuously supplied.

The active core can be guaranteed, and it is not difficult for Donkey Kong to keep the totem running.

In other words, we can continue to develop how to convert the work done by the dual-core totem switching device into usable kinetic energy.

Shen Cong took out the paper and wrote and drew on it: "Guide resonance, cut each other, entangle repulsion, inject activity, maintain operation, generate storm, operate at high speed, absorb activity... If you fix one end, fix one of the totems, the other If the totem is equipped with gears, does it mean that only the totem with gears will rotate, double the speed?"

"It can be seen from the previous experiments that the field between the two totems has a mutual repulsion in the field, which drives the totem itself to rotate. This repulsion becomes more obvious the closer it is...one is fixed as the rotor, and the other is stretchable as the stator , this kind of interaction can act as an engine!"

...

In Shen Cong's mind, the new dual-core totem switching device became more and more clear.

Quickly picked up the pen, drew a brand new design on paper, and wrote the words "Totem Engine" in the upper left corner of the drawing.

The totem engine relies on two totems to work together—the rotor totem and the stator totem.

The rotor totem is a base disc with two active cores inserted symmetrically on the left and right, with a relatively small diameter. At the same time, a central shaft is connected with the rotating gear outside the engine as a way of kinetic energy output.

The rotor totem can rotate, but the chassis is fixed and cannot move left and right, forward and backward, and can only drive the central axis to rotate.

The stator totem is a disc with a larger diameter, with two symmetrical active cores inserted. The stator totem has no central axis and is fixed and cannot be rotated. But the whole can do telescopic movement, when pulled up, the stator totem is separated from the rotor totem, and when pressed down, the stator totem covers the rotor totem.

When the totem starts to work, the rotor totem runs at high speed, drives the gear of the central shaft, and outputs external work.

The stator totem depends on the degree of expansion and contraction to complete the gearing work of acceleration and deceleration.

In this way, a perfect totem engine is manufactured!

"call!"

Putting down his pen and picking up the drawing, Shen Cong let out a long breath. He felt that this design was reasonable, and it effectively solved the problem of engine speed regulation.

If the speed cannot be adjusted, the engine cannot be used directly-how can an old driver drive.

The totem engine has been formed on paper, and the next step is to continue to do experiments, take all aspects into consideration, and assemble the simplest totem engine for calibration.

After everything is in place, the engine of Donkey Kong can be modified and a totem engine can be installed.

...

Before I knew it, it was already dark.

Shen Cong spent the whole day experimenting, especially devoting almost all his energy to the totem engine.

Finally in the evening, the first experimental totem engine was manufactured by him. The experimental machine is placed on the aisle in the carriage, and it is a bit big, mainly because the active core used is also relatively large.

Electronically regulated shifting.

The rotating shaft was connected to a generator and fitted with a light bulb.

"Eat first, get rid of other experiments, and immediately test the effect of the totem engine."

Shen Cong still has three sets of experiments in his hand. The first set is the experiment of feeding honey bees with banyan tree yoghurt, and the results have not yet observed any changes; the second set is his own banyan tree yoghurt experiment on bone development stimulation. After drinking yogurt, it was found that the signs of teeth, nails, and hair growth were not obvious.

The third group is the mixed feeding experiment of blackhead live pearls and banyan tree yoghurt. The activity of blackheads has increased again, but no physical changes have been observed.

After recording the experimental data, Shen Cong soaked in the greenhouse for another half an hour. His peach tree had already fruited, and there were more than a dozen live peaches that were not ripe yet.

The lotus seeds have already been harvested, and the potatoes have begun to sprout.

It's a pity that no new honey source has been found for the time being. The production of Mibao bee's Mibao has been discontinued, and the supply to him has also been reduced, especially the royal jelly, which is now only enough for the queen bee.

"New flowers need to be found. The climate near the oasis has been reversed. There is no distinction between winter and summer. You should be able to find honey sources nearby."

Leaving the greenhouse, he went to the ant nest to stay for a few minutes. The ant eggs laid by Yi Lishen are now huge, and the first huge ant egg is about to hatch.

King Kong ant colonies develop rapidly.

After doing all this, Shen Cong took a five-minute rest and began to continue the research on the totem engine. (To be continued.)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like